Soda Shaker Kitchen Cabinets

Recessed

3/4" x 1-1/2" solid wood

Solid maple or birch

Solid maple

1/2" plywood

1/2" plywood

1/2" plywood

3" wide x 3/4" thick picture frame back with 1/4" plywood center

3/4" plywood, adjustable, metal shelf rests

18"

5-piece

Dovetail drawer boxes, 1/2" thick solid wood side panels, 3/8" thick plywood bottom

Full extension, soft closing, undermount glides

Metal bracket reinforced corners

Full

Soft-close

Clear coated natural maple interior

None

Screw, glue & staple assembly

Polyurethane UV Resistant Finish

1/2" thick, edge banded

3/4" thick x 1-1/2" wide

Yes

Hinged right by default; doors can be flipped for a left hinge orientation (hinge holes may need to be drilled onsite)

Yes

Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/2" space needs to be left (which can be filled with a filler that is cut to size). The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards.* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.