Haven Graphite Slim Shaker Cabinets

Slim Shaker

3/4" solid wood

HDF

HDF

3"

Yes

1/2" plywood

1/2" plywood

1/2" plywood

1/2" plywood center

3/4" plywood, adjustable, plastic shelf clips

12"

5-piece

Dovetail drawer boxes, 3/4" thick solid wood side panels, 1/2" thick plywood bottom

Full extension, soft closing, undermount glides

Metal bracket reinforced corners

Full

Soft-close

Matches door finish, including shelves (drawer boxes are a natural finish)

Cabinets 39" and wider will have center stiles; these cabinets do not have butt doors.

Screw & Glue

Baked on UV Finish

1/2" thick *please note that while individual toe kicks come with each base cabinet, the 8' pieces of toe kick (TK8) should also be ordered to cover the unfinished edges of the side panels*

3/4" plywood

Yes

Hinged right by default; doors can be flipped for a left hinge orientation (hinge holes may need to be drilled onsite).

Yes

Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/2" space needs to be left (which can be filled with a filler that is cut to size). The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards.* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.