Glenwood Shaker Kitchen Cabinets Pre-Assembled

Shaker

3/4" x 1-1/2" solid wood

3/4″ kiln-dried hardwood

Veneered MDF

1/2" thick engineered wood core plywood, fastened to front frame with tongue-in-groove construction

3/16" hardboard dadoed into sides, interlocked into hanging rails of all wall units, and secured with an adhesive for added strength

3/16" hardboard dadoed into sides

1/8" hardboard recessed in sides

Shelves are 1/2" engineered wood, with rounded front edge and printed wood grain

12"

"Four sided captive" 7/16" birch 9-ply box with 1/8" birch 3-ply bottom

Durable nylon rollers ride smoothly on finished metal runners

Partial

Chadwood, Glenwood, Warmwood and DWhite feature concealed self-closing hinges. Gray features concealed soft-closing hinges

Clear coated natural interior

Yes

Mortise & Tenon, Glue

A 4-step process is applied to the exterior finish of Glenwood, Warmwood, and Chadwood: Stain, Sealer, Sanding, and Catalyzed Top Coat. This finish is resistant to household chemicals such as water, beverages, mild acids – even nail polish. A 3-step process is applied to the exterior finish of DWhite: Primer (2 coats), Sanding, and Enamel. Gray: A 3-step process is applied to the exterior finish of the gray cabinet box: Primer, Sanding, and Enamel. The Gray Door and Drawer Front is a Decorative Laminate Veneer

Solid wood toe kicks, 3/4″ thick

3/4" thick x 1-1/2" wide

Yes

Hinged right by default, doors can be flipped for a left hinge orientation (hinge holes may need to be drilled onsite)

Yes, 1/2" thick engineered wood core with hardwood veneers

Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/4" space needs to be left (which can be filled with a filler that is cut to size).
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.