Belmont Almond Shaker Cabinets

Belmont Almond is a soft, warm painted neutral that sits between white and greige, so it lifts a kitchen without the coolness of a true white. The recessed panel door carries a beveled inside edge that catches light along the frame, which gives the flat centre panel some quiet depth. Solid birch frames, full overlay doors, soft close hinges and dovetailed drawer boxes come standard, and the collection covers a full kitchen from bases and walls through mouldings, panels, fillers and shelving.

Basic kitchen starts at$5,336.84$3,202.10

Average Lead Time 4-8 Business Day Average Lead Time

Colors: Almond

Refundable Free Shipping

Belmont Almond Sample Door

$29.99

Start Your Order

Full description

Cabinet details & specs

Style

Recessed Panel

Face Frame

3/4" x 1-3/4" Birch

Door Frame

Solid Birch

Door Center

Premium Veneered HDF (HDF is used to avoid cracking/warping)

Door Frame Width

2.75"

Center Panel Beveled Edge

Yes

Sides

1/2" A-Grade Plywood

Top & Bottom (Wall)

1/2" A-Grade Plywood

Bottom (Base)

1/2" A-Grade Plywood

Back Panel

1/2" A-Grade Plywood Full Back

Shelves

Adjustable 3/4" w/ Front Edge Banding

Base Cabinet Shelf Depth

12"

Drawer Box

5/8" solid hardwood, dovetailed drawer box, 5/16" plywood drawer box bottom, 5-piece drawer front construction

Drawer Glides

Undermount, Full Extension, Soft Close Glides

Base Corner Supports

3/4" Solid Wood Corner Blocks

Overlay

Full

Hinges

6-way Adjustable, Concealed, European Soft Close Hinges

Cabinet Interior

UV Coated Natural Interior (Prepped-for-glass cabinets will be finished to match the cabinet fronts)

Center Stile

None (unless listed in the cabinet description)

Assembly Method

Metal Clip or Glue & Staple: Cabinets come with Metal Clips (cleats - not already installed on the cabinets) that can be used to assemble or the cabinets can be Glued and Stapled.

Finish

7 step, acid-catalyzed finish process with a UV coating

Toe Kick

1/2" Plywood *please note that while individual toe kicks come with each base cabinet, the 8' pieces of toe kick (TK8) should also be ordered to cover the unfinished edges of the side panels*

Installation Rail

None

Wall Cabinet Bottoms Finished (Exterior)

Yes (just bottom panel, edges of side and back panel and recessed area is unfinished)

CARB Compliant

Yes

Door Hinges

Doors come pre-drilled for the hinges, the face frame has marks where to drill, and the customer chooses Right or Left during assembly.

Toe Kicks Included w/Base Cabinets

Yes, but there will be a small gap when two cabinets are side by side, so the TKC (8' toe kick) is needed if cabinets are next to each other.

Side Panels Finished

Yes

Installation/Design Note

The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, and a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards.* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Shipping

4-8 Business Day Average Lead Time

How To Measure Your Kitchen