Savannah Woodland Slim Kitchen Cabinets Pre-Assembled

Slim Shaker

3/4" x 1-1/2" Solid Wood

Solid Wood

Veneered MDF (MDF is used to avoid cracking/warping)

1/2" veneered plywood

1/2" veneered plywood

1/2" veneered plywood

1/2" veneered plywood

3/4" veneered plywood, adjustable, edgebanded on front. Supported by metal clips

18" (21" deep on tall cabinets)

5-piece drawer fronts are 1/2” thick recessed MDF/veneer center panel that match door design and detail

5/8” thick solid wood dovetail drawer box with a 3/8” plywood bottom. Interior drawer height is 3"

Blumotion full extension soft-closing concealed drawer runners

Mortise and Tenon

Full

Compact Clip Hinges with Quick-Release technology. Blum Compact Clip Concealed Hinges and feature Quick-Release Technology with Blumotion Soft close. Hinges are six-way adjustable and open at 110

Clear coated natural interior

None

Mortise and tenon assembly

Saturated Deep Brown Stain

3/4" x 4-1/2" unfinished plywood* toe kick. Additional 8-foot lengths of 1/4" toe kicks are available in matching color to our cabinetry

Stiles and rails are ¾" thick and 2½" wide (reduced rails are 1 1/2" wide)

No

Yes

Hinged right by default, doors can be flipped for a left hinge orientation (hinge holes may need to be drilled onsite)

Yes, but additional toe kick molding is needed to hide gaps/seams where cabinets/fillers meet

Yes

Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/4" space needs to be left (which can be filled with a filler that is cut to size). The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. FINISH DISCLAIMER: Due to the nature of wood and the complex finishing processes used to generate stained finishes, there may be variations in color which are considered normal.