Cream White Shaker Kitchen Cabinets Pre-Assembled

- Features

Pre-Assembled Kitchen Cabinets
2-4 Week Average Lead Time
Solid Wood Face Frames
Full Overlay Doors
Concealed European Style Hinges
UV Coated Natural Interior
1/2″ Plywood Box with Finished Exterior
Full Extension Soft Close Undermount Drawer Glides
Metal Clip Assembly

+ About

The Cream White Shaker collection is a true eye catcher. From the gourmet cook’s kitchen to the most modest of layouts, this style fits just about any setting. The collection features soft closing drawers and doors and a timeless full overlay, shaker design. If you want to upgrade your kitchen with warm classic white cabinets, then look no further! The Cream White Shaker is what you’re looking for.

+ Specs

Style

Shaker

Face Frame

3/4" x 1-1/2" solid wood

Door Frame

Solid maple or birch

Door Center

HDF

Sides

1/2" plywood

Top & Bottom (Wall)

1/2" plywood

Bottom (Base)

1/2" plywood

Back Panel

3" wide x 3/4" thick picture frame back with 1/4" plywood center

Shelves

3/4" plywood, adjustable, metal shelf rests

Base Cabinet Shelf Depth

18"

Drawer Front

5-piece

Drawer Box

Dovetail drawer boxes, 1/2" thick solid wood side panels, 3/8" thick plywood bottom

Drawer Glides

Full extension, soft closing, undermount glides

Base Corner Supports

Metal bracket reinforced corners

Overlay

Full

Hinges

Soft-close

Cabinet Interior

Clear coated natural maple interior

Center Stile

None

Assembly Method

Screw, glue & staple assembly

Finish

Polyurethane UV Resistant Finish w/ Glaze

Toe Kick

1/2" thick, edge banded

Installation Rail

3/4" thick x 1-1/2" wide

CARB Compliant

Yes

Door Hinges

Hinged right by default; doors can be flipped for a left hinge orientation (hinge holes may need to be drilled onsite)

Side Panels Finished

Yes

Installation/Design Note

Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/2" space needs to be left (which can be filled with a filler that is cut to size). The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards.* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.